Extra 10% off on FumeClear FC-350 Fume Extractor Now Learn More
XL-300 Promotion,Get an Extra 15% Discount Learn More
10% off for First Purchase, Code:FUMECLEAR10
Product Overview
*This product conforms to applicable CE requirements and the purifying effect has been confirmed by the American PONY international professional testing agency.
*This product has double ports and double tubes.
Usage scenarios of this product:
With the triple-filter design and powerful suction, the absorbing efficiency and filtration ratio can reach 99.97%. The purified air can be discharged directly indoors.
FC-1002A filtration system consists of:
Our products package with 7 filter
Filter Use & Maintenance
This product uses disposable filtering elements. When these elements have been use to a certain extent, they need to be cleaned or replaced in order to guarantee the good purifying effect of the machine.
Use method: Place the Pre-filter on top of Middle Filter. The front side (rough side) is facing upwards (air inlet direction). When the accumulated dust on the Pre-filter is over 70% and cannot be cleaned any more, please replace the Pre-filter with a new one.
Use method: With the handle side facing up, put the Middle Filter inside the Main Filter. The medium filter shall be immediately cleaned off when the accumulated dust on the Middle Filter evidently affects the suction power. When it cannot be cleaned any more, please replace the Middle Filter with a new one.
3. Main Filter
Use method: With the handle side facing up, place the Main Filter at the bottom inside the machine. When it cannot effectively eliminate the peculiar smell in the smoke, please replace it with a new one.
Model | FC-1002A |
Air inlet interface | Φ75mm *2 flange |
Voltage | AC 110/220V |
Power | 210W |
Max. No-load Speed(r/min) | 6000 |
Negative Pressure | 3000Pa |
Filtering effect | 0.3μm99.97% |
Noise | <65dB |
CFM | 194 |
Dimensions(L*W*H) | 425*250*410mm |
Weight | 15Kg |
Name of Parts |
Qty |
Specification |
Remarks |
Motor | 1 | Installed | |
Power Line | 1 | 1.5M 10A250V | |
Duct | 1 | 75mm dia*1.4m | |
Warranty card | 1 | ||
User Manual | 1 | ||
Pre-Filter | 5 | 1of 5 is installed | |
Medium filter | 1 | Installed | |
Carbon Filter | 1 | Installed |
Check Before Using
Before switching on the power for the first time, please ensure that the following conditions exist, so as to guarantee safe operation.
The speed-regulating button is adjusted to “OFF” Status;
Safety Precautions
Installation & Use instructions
Open the top cover and correctly install the high-efficient filtering core, medium-efficient filtering core, primary-efficient cotton filtering with top cover and press for buckle hasps at the two sides.
⚠️When adjusting the direction of suction duct hose, try to maintain a broad loop or bend radius of the hose, otherwise it will affect the suction force. The suction inlet shall directly face the working point. Keep the distance within 150mm.
⚠️Try to avoid areas with excessive air flow, otherwise suction force will be affected or diminish completely.
Thanks for subscribing!
This email has been registered!