Extra 10% off on FumeClear FC-350 Fume Extractor Now Learn More
XL-300 Promotion,Get an Extra 15% Discount Learn More
10% off for First Purchase, Code:FUMECLEAR10
Product Showcase Video
Product Overview
*Our fume extractors have obtained CE security certification and the purifying effect has been confirmed by American PONY international professional testing agency with the certificates as below.The purified air can be discharged indoors directly.
Usage scenarios of this product:
Scope of application: Laser smoke evacuators are mainly used to eliminate large amounts of smoke and dust generated during medium and large laser cutting, laser welding, laser engraving and other processes.
5-stage filtration design, strong suction, adsorption efficiency and filtration rate up to 99.97%. The purified air can be discharged directly into the room.
Main Features:
New Duct Design (Soft Pipe + Hard Pipe): it can achieve great flexibility in fixing the arm. You can also choose to mount the arm on the wall or on the workbench.
Product Size:
Specification:
List of installed:
XL-700 filtration system consists of:
Our products package with 8 filter
Filter Use & Maintenance :
Filter cartridge installation instructions
1.Turn the two butterfly buttons on the sides of thebox counterclockwise,and open the door on the chassis.
2.Turn the two butterfly buttons on the right side of thebox counterclockwise, and open the front door of the chassis.
3.Start with the top layer. Pull the belt and drawout the filter elenent one by one.
4.After replacing a certain level of filter element, we will putfrom top to bottom according to the order.
0peration instruction:
Troubleshooting:
Before operation, please take note of the following safety precautions in order to avoid fire or inguiries.
Attention: Make sure to switch off the power before checking and repairing the machine.
Routine Maintenance:
Cause: The machine gives alarm for filter clogging.
Solution: During the buzzing, take out the filters in this sequence:Pre-filter, Glass Fiber Filter,Active Carbon Filter. When you take out whichever filter and the machine stops buzzing, it means this particular filter needs to be replaced.
Cause: If the machine is buzzing, please confirm first if the adjusting valve is completely opened or not. Then please turn on the three-in-one switch and check if the switch indicator is on or not. If the indicator is not on and the circuit has no problem, probably the fuse is broken. Solution: Replace the fuse.
Steps to replace fuse
Thanks for subscribing!
This email has been registered!