*This product conforms to applicable CE requirements and the purifying effect has been confirmed by the American PONY international professional testing agency.
Fumeclear® FC-100A uses a 3-layer filtration system. The filter is a disposable filter element and cannot be recycled.
If the filter element is not replaced for a long time, it will result in the inability to effectively filter harmful substances.
Usage scenarios of this product:
Smoke, odor, dust, toxic and harmful gases, welding, laser marking and engraving, printing, medical treatment and other places where smoke is generated.
⚠️Please note that this product is not suitable for industry and is only suitable for home use.
FC-100A filtration system consists of:
- Pre-filter
If you are engaged in laser welding soldering work that produces more large particles, we recommend placing 2 pre-filters in the FC-100A. This provides better filtration and can extend the life of the main filter. In addition, clean off the large particles of impurities on the used pre-filter, which can be used as appropriate.
- Middle Filter
Use method: With the handle side facing up, put the Middle Filter and Medium carbon filter inside the Main Filter. The medium filter shall be immediately cleaned off when the accumulated dust on the Middle Filter evidently affects the suction power. When it cannot be cleaned any more, please replace the Middle Filter with a new one.
- Main Filter
Use method: With the handle side facing up, place the Main Filter at the bottom inside the machine. When it cannot effectively eliminate the peculiar smell in the smoke, please replace it with a new one.
Check Before Using
Before switching on the power for the first time, please ensure that the following conditions exist, so as to guarantee safe operation.
1.The machine should be intact:
2.The power switch should be in the OFF position;
3.The filter element(s) should be evenly placed;
4.The cover and box body should be installed securely:
5.The speed-regulating button is adjusted to "OFF" Status;
Safety Precautions
⚠️Before use, please read and follow the safe typre cautions below to prevent fire and personal injury
⚠️This product is prohibited to be used in a high temperature environment (above80°C)or in a flammable. explosive or greasy environment.
⚠️Supply wire must be grounded during operation. Internal electric voltage of the product is as high as310V.
⚠️Do not remove or install filter elements while the machine is operating. Hands or other objects should not touch the rotating impeller. Dis-assembly of the product for inspection or maintenance must be performed by professionals.
⚠️Please do not use this product in strong acidic and alkaline environment, otherwise it will cause damage to the brushless motor and affect the service life.
Installation &Use instructions
- Filtering Core Installation
Open the top cover and correctly install the high-efficient filtering core, medium-efficient filtering core, primary-efficient cotton filtering with top cover and press for buckle hasps at the(wo sides.
- Suction Duct Hose Installation
Remove the hose from the package, and attach it lo the duct flange on the cover of the machine.
Turn the tube, aim exhaust fume collecting hood with the smoke outlet. Adjust the suction distance based on the application.
