FUMECLEAR HALLOWEEN SALE

00

D

00

H

00

MIN

00

S

Laser Fume Extractor

Solder Fume Extractor

Industrial Extractor

Nail Equipment

FAQ

BANISH LASER FUMES

FumeClear FC-2001X Laser Fume Extractor with H13 HEPA for Small Engraver, UV & DTF Printer Fumeclear fumeclear

Fumeclear FC-2001X delivers clean air and peace of mind for laser creators.

Fumeclear FC-2001X desktop laser fume extractor with sealed design to prevent smoke leaks, shown with green transparent unit and white main body

Fumeclear FC-2001X laser fume extractor HEPA H13 filter for 99.97% 0.3μm particle removal and professional smoke absorption

Fumeclear FC-2001X odorless laser fume extractor for 5-10W laser engravers including xTool F1, K10, L2, M1 and more

Fumeclear FC-2001X laser fume extractor ultra-quiet operation at 50dB for focused work, shown with woman using laptop in home office

Fumeclear FC-2001X unique brushless motor with powerful 2.2kPa suction and 3-speed control for laser fume extractor

Fumeclear FC-2001X laser fume extractor enables fearless engraving and fume-free breathing with desktop laser machine

Fumeclear FC-2001X laser fume extractor with intuitive one-touch LED control panel and 3-speed adjustment

Fumeclear FC-2001X laser fume extractor unboxing contents: main unit, 1m Φ60mm duct hose, 5 pre-filters, HEPA H13 filter, power adapter and manual

Fumeclear FC-2001X laser fume extractor with replaceable HEPA H13 and carbon filter layers shown separately

FumeClear FC-2001X Laserrauchabsauger mit H13 HEPA-Filter für Lasergravierer, UV- & DTF-Drucker

$209.99

$249.99

•Powerful 3-Speed Suction

•Quiet ≤55 dB

•Compact & Portable

•Multi-Application Use

"Perfect for my Equipment. I use the FumeClear with my XTool M1, and I am thrilled. I do a lot of wood cutting and engraving. That generates some nasty odors, which this little unit absorbs perfectly! It was a very good purchase!"

"Despite its compact size, the powerful suction captures nearly all smoke and leaves almost no odor. The multi-stage filtration system and five replaceable pre-filters are well-designed. I can work for hours in a clean, comfortable environment. Highly recommended for hobbyists and small studios!"

"The FC-2001X works great with my Sculpfun iCube Ultra. Its strong suction clears smoke effectively, and the three fan speeds balance airflow and noise. While it's loud on high and could use tactile buttons, it's a powerful, reliable choice for compact laser setups."

"This fume extractor works great for soldering! The strong suction pulls smoke away before it reaches my face. It's quiet on lower settings, easy to set up, and compact enough for my small workbench. No more watery eyes or lingering fumes. Highly recommend!"

"Veryyy amazing noise is not that bad but i am using it for my UV PRINTER and BYE BYE INK SMELL and it keeps the VOC and everything good and green, quality? AMAZINGGGGGGG AND SUCH A GOOD DEAL FOR MONEY"

"I have had the FumeClear FC-2002A fume extractor for about 5 days now. I wish there were more stars for me to use. It is by far and away the best extractor for my laser. I had two others... they were expensive JUNK that I returned... but this one meets and exceeds all my needs and expectations."

"Great portable Extractor - easy to use, reliable and robust.
We are regualrly at events supplying laser engraving services and this unit provides us with consistent fume extraction at all occassions.
Easy to pack into vehicle and compact but wil great build quality."

"I am using this vac on two X Tool laser machines, the S1 and a F1. The fume collector works great on both devices and is able to keep up with heavy smoke from cutting wood and leather. The filters are easy to change and blow out. The machine did a good job of warning me that the filters were clogged before I was able to realize it."

"Plenty of power for an open laser.

FANTASTIC! I use this for a laser engraver that's open. This has plenty of power to suck the smoke and fumes right out of the air. Much better than the one that came with the laser."

"The suction is incredible! It's far better than my laser's built-in exhaust fan or duct fan. The filtration works remarkably well, removing noticeable odors and visible smoke. The cotton pre-filters trap a ton of particulate dust and can be cleaned for reuse. For the price, this fume extractor works extremely well!"

Fumeclear® FC-2002 Smoke Extractor for Soldering & Small Laser fumeclear fumeclear

Fumeclear® Laser Fume Extractor with Exhaust for F1, S1, M1, F2, D1 Pro 10W to 40W Laser Engraver FC-2002A fumeclear fumeclear

The FumeClear FC-2002A supports two types of duct connections, making it suitable for different applications.

Fumeclear Fume extractor with lifetime after-sales support for product defects and application scenario mismatch

FumeClear FC-2002A Lötrauchabsauger – 153 CFM mit HEPA, Aktivkohle & Außenabluft

Fumeclear Fume extractor with powerful high-iodine activated carbon for thorough smoke purification and odor control

Powerful suction FumeClear fume extractor rejecting pollution with 260 m³/h airflow and blue glowing visualization for clean air

Fumeclear® Solder Fume Extractor with Exhaust for S1, D1 Pro 10W to 20W Laser Engraver FC-2002A fumeclear fumeclear

FumeClear FC-2002A Lötrauchabsauger – 153 CFM mit HEPA, Aktivkohle & Außenabluft

$418.99

$438.99

•Vent to Outside Design

•High-Iodine Activated Carbon

•Clogging Alarm & Remote

•Ideal for 10–20W Laser Engravers

Fumeclear® FC-2003 Portable Laser Fume Extractor with Dual-Port for 20-30W Laser Engraver fumeclear fumeclear

Fumeclear® FC-2003 Portable Welding Fume Extractor with Dual-Port fumeclear fumeclear

FumeClear FC-2003 Laserrauchabsauger mit Dual-Port – 194 CFM für 20–30 W Laser

FumeClear FC-2003 Laserrauchabsauger mit Dual-Port – 194 CFM für 20–30 W Laser

$538.99

$598.99

•Dual-Port Smoke Capture

•194 CFM Powerful Suction

•Clogging Alarm & Remote

•Ideal for Multi-Laser Workshops

"Really impressive filtration.

This machine has been really impressive at filtering of the air for coffee roasting. It pulls all the smoke out of the air and leaves almost no odor. It keeps the room clean and safe. This machine has been a game changer for our small coffee roasting operation."

" Very effective fume extractor. I have had this unit for 1 year now, and am happy with its performance. It is nice that the fan has multiple levels that you can run it, because at full-bore it is rather loud (and not always necessary). It was very effective at trapping dust that would have otherwise gone into the air, and been breathed in. Overall, I highly recommend this unit."

"Big and Lots of Airflow.

I had a smaller version of this that I used for soldering and for laser cutting -- but this one is even better and has two ports so it works even better for 3d printing since you can position them both on one side and really pull a lot of air."

"I was skeptical after wasting money on another brand, but I've been so happy with this machine! It's doing exactly what it should, removing smoke and the majority of fumes. I love that it's on wheels, making it easy to move around for filter changes. Overall, it works really well, and I'm really happy with it!"

"This fume extractor works perfectly! The suction power is strong, and the dual-port design makes it easy to use for two workstations at the same time. It's surprisingly quiet for how powerful it is, and the filters are easy to change. It keeps the air clean and fresh while I work. Highly recommend for anyone needing a reliable fume extractor!"

TAME THE SOLDER SMOKE

Fumeclear® FC-2001A Fume Extractor for Soldering fumeclear fumeclear

FumeClear FC-2001A Lötrauchabsauger mit HEPA- & Aktivkohlefilter – 120 m³/h

Fumeclear fc-2001a 10x purification power

Fumeclear® FC-2001A Filter Sets fumeclear fumeclear

FumeClear FC-2001A Lötrauchabsauger mit HEPA- & Aktivkohlefilter – 120 m³/h

$128.99

$138.99

•Best Under $150 for first-time buyers

•Enough Suction for smoke capture

•Noise-reducing design

•Durable Hose for everyday soldering

"Primarily using the unit for small scale soldering of PCB and audio crossover components. I can already tell a noticeable difference in the air quality around my work area. Prior to this i was using one of the highly rated small fan type filters which worked OK but not nearly as well as this unit with the flexible head. Good investment for my use as im at my bench a few times a week."

" Now, that I'm fully engaged in an DIY project with a whole lot of PCBs to assemble, I got myself an FC-2001A and I love it so much! It really sucks - in the best possible way :D. The sales support was brilliant and very helpful - they took care of all the possible tax issues and were absolutely nice.
So 5/5 stars and thank you!"

"I had been doing large stained glass pieces using only a fan to blow fumes away from my face. This wasn't a great practice. I decided to invest in this fume extractor. I feel far more comfortable with this unit now. There's less odor and I don't walk away with headaches after a full soldering session anymore."

"I purchased this for my 3D printing and hobby room so that when I work on soldering projects the fumes are reduced to acceptable levels. The unit is the perefect size for my work bench and works as advertised."

"Love my new extractor.. should have bought one years ago.

I feel much safer now I have my new extractor.
Its light to move around and eady to use in my studio
Glad I invested in this ."

"Product works exactly as intended, good supply of filters with initial order. Excellent quality, solid built, compact for its power. Significantly reduced soldering smell in my tiny workshop! Expect noise of a lower power vacuum. Doesn’t interfere with soldering. It is being used in a small silversmithing manufacturing

Adie"

"Bought for my bench space, saw a review on you tube and thought it was about time I did something to reduce my exposure to soldering fumes. Used for just a week now, all great so far. Eventually I will build it under the bench so the remote control will come in handy for that."

"Great extraction for soldering work — I typically run it at around 80%, and that's plenty. The noise at maximum is less noticeable than I expected, and the IR remote is handy. Well built with sturdy metal construction that should last a long time. Great unit, just what I needed"

"I ordered this to use for desktop soldering. My previous employer had a much more expensive version of this product and I'll use that as a reference: the power is on par with the more expensive unit, the noise level is higher, it is smaller and more portable, the flexible pipe is more rigid and easier for fine adjustment, the fume extractor attachment seems to be high temperature silicone which is more flexible and less likely to burn. Considering this unit costs around 4 times less, I think it deserves 5 stars even though it is louder."

"Functionally, this thing works great. It's extremely quiet at the lowest level, perfect for microscope work, and the remote makes it easy to increase suction for heavier soldering jobs. The long, rigid hose stays in position, and the multi-layer filter does a great job trapping fumes and odors. Built like a tank with solid metal construction and great attention to detail. It's expensive, but given its build quality and performance, it's worth every penny. Excellent buy!"

Fumeclear® FC-100A Solder Fume Extractor - 99.97% Filtration for Safe Soldering fumeclear fumeclear

Before and after air purification with FumeClear FC-100A solder fume extractor - dramatic reduction of harmful fumes in just 1 second shown with air quality meter readings

FumeClear FC-100A fume extractor - #1 customer satisfaction, 10K+ trusted customers, True H13 HEPA filter, lifetime support, and performance exceeding industry standards

FumeClear FC-100A 99.97% filtration efficiency with pre-filter and 2-in-1 H13 HEPA + high-grade activated carbon main filter, showing dust-holding capacity and service life benefits

FumeClear FC-100A high-temperature resistant fume extractor hose made of premium ABS material, withstands up to 300°C with 360° flexible positioning

FumeClear FC-100A safeguarding your health - 100W powerful suction with 0.3μm precision filtration and 99.97% VOC removal for soldering, 3D printing and laser engraving

FumeClear FC-100A fume extractor used in multiple applications including soldering, 3D printing, laser engraving, moxibustion, and nail salon - powerful multi-scenario air purification

Fumeclear FC-100A Solder Fume Extractor Video

Smart Air Flow Monitoring System of FumeClear FC-100A - real-time internal airflow monitoring with 0.07S rapid clog detection for extended service life

FumeClear FC-100A solder fume extractor with flexible extraction arm capturing smoke from 3D printer, wireless remote control, and 5-level speed settings up to 5300 RPM

Nano filtration technology of FumeClear FC-100A capturing 0.3μm VOCs, CO2, HCHO and other harmful particles with powerful airflow visualization

FumeClear FC-100A Lötrauchabsaugung mit HEPA- & Aktivkohlefilter – 99,97 % Filtration

Fumeclear® FC-100A Solder Fume Extractor

FumeClear FC-100A Lötrauchabsaugung mit HEPA- & Aktivkohlefilter – 99,97 % Filtration

$269.99

$289.99

•Powerful Suction

•1.2m Hose for reach and flexibility

•Remote Control Option

•Ideal for Professional soldering

WICKED POWER FOR INDUSTRIAL WORKSHOPS

Industrial Laser Fume Extractor System – 265 CFM, Quiet, Long-Lasting Filters, Remote Control fumeclear fumeclear

Industrial Laser Fume Extractor System – 265 CFM, Quiet, Long-Lasting Filters, Remote Control

XL-300 fume extractor suitable for laser cutting and engraving, welding, 3d printing, soldering

Fumeclear XL-300 equipped with a 5-layer filter cartridges system. Multi-layer filter achieves 99.97% purification effect.

Fumeclear xl-300 filter structured with a pre filter cartridge, a fiberglass filter cartridge and three activated carbon filter cartridge

Air quality Before and after using XL-300 laser fume extractor

Package look of Fumeclear xl-300 laser fume extractor

FumeClear XL-300 Laserrauchabsauger – 5-stufige Filterung, 265 CFM für Laser & High-VOC-Anwendungen

$1,099.99

$1,299.99

•5-Stage Filtration

•Triple Activated Carbon

•Stable Continuous Operation

•Ideal for Laser Workshops

"I have been using the XL-300 with my CNC laser setup for the past year, and I highly recommend this unit! It extracts fumes so effectively that I cannot smell any fumes while the machine is running. It operates extremely quietly, even at half speed, and its compact size doesn't take up too much space in my shop. Great performance all around!"

" The XL-300 is awesome! It traps all the smoke and fumes from cutting acrylic, wood, and EVA foam, and works great with my 20-watt fiber laser. I love the easy, one-at-a-time filter changes and variable speed control. I'm happy I invested in a real fume extractor rather than an underpowered unit!"

"The XL-300 was exactly what I was looking for. It works great and handles smoke like a champ. It's pretty quiet in my garage and pulls tons of air. I use it with my 80W laser, and can even cut with the garage door closed. The only thing I wish it could do is take out the smell of the wood and acrylic. But I bet that's a pretty tall ask. I'm very satisfied with this machine!"

"This is one of the best improvements to our laser engraving and 3d printing room. It replaced an 8" blower (welding fume fan) and is much more effective at removing smoke and fumes. Many smaller projects do not even require outside venting and makes the room much more pleasant to work in. Controls are very easy and the amount of air draw is impressive."

"This machine is quieter than expected. It provides really good suction, it compares the another unit I have that cost twice the money. I'd recommend it to anyone who is looking for one."

"This Fumeclear fume extractor saved our laser cutting operation. The building design did not allow us to vent outside, and this unit effectively clears thick smoke and eliminates harsh, burnt odors right at the source, allowing us to run our laser indoors without compromising on air quality or safety."

"Great Product.

Purchased the unit for my laser and what a huge improvement it has made.; elimination of smoke and smell from my workshop. I would highly recommend the item."

Industrial Laser Fume Extractor XL-700 for Heavy Smoke & VOCs fumeclear fumeclear

FumeClear XL-700 Industrieller Laserrauchabsauger – 450 CFM, 700 W & 8-stufige Filterung

Fume Extractor for Laser Engraver, Laser Cutter, Welding, DTF Printing, Fumeclear Multifunctional Fume Extractor XL-700 fumeclear fumeclear

FumeClear XL-700 Industrieller Laserrauchabsauger – 450 CFM, 700 W & 8-stufige Filterung

$3,100.00

$3,999.00

•450 CFM Powerful Suction

•8-Stage Filtration

•4 Activated Carbon Filters

•Ideal for Heavy-Duty Laser Processing

FumeClear Industrial Dust Collector | 500+ CFM Low-Maintenance Dust Extraction System for CNC, Laser & Grinding Fumeclear fumeclear

Fumeclear FC-700 dust collector capturing welding fumes and grinding sparks in professional workshop, ensuring clean and safe air

Fumeclear FC-700 industrial dust collector suitable for laser cutting, metal grinding, plastic processing and mold making

Fumeclear FC-700 professional dust collector with HEPA filter, remote control, retractable hose and round hood for workshop dust extraction

Fumeclear FC-700 high-power brushless motor dust collector with strong suction and low-noise operation

Fumeclear FC-700 built-in HEPA filter efficient filtration system capturing fine particles for long-lasting performance

Fumeclear FC-700 premium H13 HEPA filter system captures 99.97% of particles as small as 0.3 microns

Fumeclear FC-700 dust collector with noise-absorbing cotton for superior sound isolation and quiet operation

Fumeclear FC-700 premium dust collector with HEPA filter, hose, remote control and all accessories

Fumeclear FC-700 dust collector with convenient slide-out collection bin for easy cleanup and metal particle recovery

Fumeclear FC-700 dust collector with wireless remote control and digital display for easy airflow and timing control

FumeClear Industrieller Entstauber FC-400/FC-700 – 500+ CFM für CNC, Laser & Schleifen

$3,200.00

$3,300.00

•500+ CFM Powerful Suction

•Clog-Resistant Filtration

•6–12 Month Filter Life

•Built for CNC, Grinding & Polishing

"We use it around our mold and plastic processing equipment. It handles the fine debris well and keeps the immediate work area noticeably cleaner. The built-in collection drawer also makes routine maintenance pretty straightforward."

" We do some CNC work and grinding in the same workspace, and the dust buildup was becoming a real headache. Since adding the FumeClear, there's noticeably less dust around the machines, and I'm not constantly cleaning up after every job. It's simple to use, and the filter has been holding up much better than our previous setup. It doesn't completely replace regular cleanup, but it has definitely made keeping the workspace clean a lot easier."

"I run a metal fabrication shop and needed a dust collector that could keep up with daily grinding, cutting, and fabrication work. This unit delivers strong suction and does an excellent job capturing fine dust and particles before they spread throughout the shop. It has made our workspace noticeably cleaner and easier to maintain."

NO TRICKS, JSUT CLEANER NAILS

FumeClear FC-ND35-PRO Professional Nail Drill – 35,000 RPM Electric Nail File with Ultra-Low Vibration fumeclear fumeclear

FUMECLEAR Nail Drill 3500RPM High Speed Motor - Low Heat, Low Vibration, Low Noise Professional Electric Nail Drill

Nail Salon Equipment Bundle – Fume Extractor, Dust Collector & Nail Drill Fumeclear fumeclear

FUMECLEAR Nail Drill Multifunction Uses - Acrylic Nails, Dip Powder, Manicure Pedicure, Thick Nails and Callus Removal

FUMECLEAR Nail Drill Easy Bit Replacement Guide - How to Change Nail Drill Bits Step by Step

FumeClear FC-ND35-PRO Professional Nail Drill – 35,000 RPM Electric Nail File with Ultra-Low Vibration & Waterproof Design fumeclear fumeclear

FumeClear FC-ND35-PRO Elektrische Nagelfräse – 35.000 U/min, vibrationsarm

$89.99

•35,000 RPM High Speed

•Ultra-Low Vibration

•Smooth Speed Control

•Professional & Home Use

"This is truly beautiful. The slim and strong suction is impressive, and it's exactly what we were looking for. Honestly, I find it stunning. I'm really glad I bought this for my wife; it brings her so much joy. I feel proud to have such good taste."

" So far it has been amazing and overall a dream! It has a sleek design and is simple and straightforward to use. I was able to remove the previous color and do cuticle work quickly and efficiently, making the whole process so much easier. I would definitely recommend this for beginners or at-home use!"

"II love this nail drill. I'm a beginner and I think works perfectly for me, so it's suitable for people who are just starting. It doesn't vibrate as much as I thought it would, so it's good, and battery lasts long (I don't work with it every day, but some times I do 4 or 5 manicures per week). Materials are durable, the weight is on point.You can use it for dry manicure, taking of material, etc. (with the right bits). The cord leght for me is good."

"Such good value!!!

This is such a good drill for the cost. Im an intermediate at doing my own nails, and this is absolutely perfect for me. I had another one before this, and this was definitely worth the upgrade"

"Don't regret buying it even though I'm not a professional. It comes down to my level. Other inexpensive manicure/pedicure sets are a waste of money. This is from an amateur point of view. I've always believed that it's all in the tools. Find a way to afford this. You'll spend more than that getting your nails done by a professional. Yours will look as good or better with this machine. Cuts time down in prepping your nails for whatever you need to do next."

"Absolutely love my new FumeClear desk dust collector! The larger size gives me so much more coverage while I work, yet it’s surprisingly thin and doesn’t take up much space. It works incredibly well for the price, and the pause button is so convenient. If you’re looking for something sleek that performs well and offers great value, I would definitely recommend the FumeClear!"

"Works amazing! No longer worry about air quality while doing nails and reduces cleanup considerably! While it is still two fans running - it is very quiet for what it is/does. I have alot of sensory issues - this does not bother me."

"OMG... Lovin' your nail dust collector. I've spent a considerable amount of money on some of the industry's most standout nail equipment - dust collectors, specifically - and THIS THING is the truth! Not an ounce of dust on my workspace, and honestly not much on my hands."

"Fantastic suction! I purchased two other brands and was really disappointed, but THIS ONE IS DIFFERENT! At 1600Pa, it has much better suction than the majority of nail dust collectors I've found. I needed something stronger to keep my nail workspace clean, and I'm very happy with my purchase!"

"I absolutely loved this nail dust extractor. It's very comfortable to use, not too big, and has great suction power. I really like that you can adjust the power level, which makes it perfect for different services.It works perfectly during manicures, keeps the workspace clean, and makes the job much easier. The size is ideal for a nail table without taking up too much space.I highly recommend it to my fellow nail technicians. Great quality and excellent performance!"

Fumeclear Professional Nail Dust Collector – Quiet Dual-Port Vacuum FC-G6 with 30 Filter Papers Fumeclear fumeclear

FUMECLEAR FC-G6 Nail Dust Collector with Easy Peel-Off Filter Replacement - Ideal for Home and Professional Nail Studios, Compact Design

FUMECLEAR FC-G6 Nail Dust Collector 1600Pa with 2x 4200RPM Brushless Turbo Fan, Professional Manicure Dust Vacuum Extractor with Double Filter System

FUMECLEAR FC-G6 Professional Nail Dust Collector - Salon Quality Manicure Essential for Every Nail Treatment

FUMECLEAR FC-G6 Nail Dust Collector Ultra Slim 2.5cm Body - Compact and Space Saving Professional Manicure Dust Vacuum

FUMECLEAR FC-G6 Nail Dust Collector Adjustable Suction Power - Easy Control Knob for Strong 1600Pa Suction, Professional Manicure Vacuum Cleaner

FUMECLEAR FC-G6 Nail Dust Collector - Wide Applications for Nail Salon, Home Nail Art, Hand Grinding and Jewelry Carving, Professional Manicure Dust Vacuum

FUMECLEAR FC-G6 Nail Dust Collector Top View - Professional Dual 4200RPM Turbo Fan Manicure Dust Vacuum with 1600Pa Strong Suction

FumeClear FC-G6 Nagelstaubsauger – Professionelle Nagelstaubabsaugung mit 1600 Pa

$109.99

$129.99

•Dual-Fan Dust Capture

•10-Speed Adjustable Suction

•Quick-Change Filter Papers

•Slim, Space-Saving Design

Fumeclear® FC-1001A Fume Extractor for Nail Salon/ 3D printing fumeclear fumeclear

FUMECLEAR FC-1001A Fume Extractor for Laser - Used in professional nail salon for manicure fume removal, also ideal for laser engraving, 3D printing and soldering

Fumeclear FC-1001A white model filter layers – pre-filter, HEPA, activated carbon

FUMECLEAR FC-1001A Fume Extractor for Laser - Multi-purpose smoke extractor for laser engraving, soldering, rosin welding, nail salon and beauty care

Fumeclear FC-1001A white fume extractor with brushless motor, 2200Pa suction, 210W power, 60dB low noise, 4500rpm speed

Fumeclear FC-1001A white fume extractor technical specifications

Fumeclear FC-1001A white fume extractor full packing list

Fumeclear® FC-1001A Fume Extractor for 3D printing/ Nail Salon fumeclear fumeclear

Fumeclear FC-1001A white fume extractor with filter set

FumeClear FC-1001A Fume Extractor für 3D-Druck & Nagelstudios – 194 CFM, H13 HEPA & Aktivkohle

$579.99

$699.00

•Acrylic Dust & Odor Removal

•1.4m Flexible Hose

•Quiet Operation

•Professional Nail Salon Use

"This Machine is Amazing it does exactly what I needed to take a way the monomer smell and nail dust away. My sinuses are much better now! This was the best investment I've had made in my career!"

" I work in a nail salon, and the dust and odor from nail products used to overwhelm me and my clients. The FumeClear FC1001-A greatly reduces the dust and odor around my station. If you want to invest in your health as a nail technician, the FumeClear FC1001-A is your go-to air cleaner. 100% fantastic!"

"Amazing for nail salon space.

Super effective at removing all fumes from my small nail art space, I can feel much better about my air quality for me and my clients. The sound is not too loud and it's been the best upgrade I've made for my space. Highly recommend!"

"Great product! I installed it next to a nail tech station at my wife's salon and it worked like a charm. She previously had neighboring tenants complaining about the smell, specifically the VOCs from acrylic nails. I was surprised at how well the carbon filter absorbed the smell."

"This product is for a nail salon in my building. When I opened the business the tenant in the upstairs apartment complained of fumes. I ordered this machine and it took care of that problem.！！！！"

FAQ

Are taxes and duties included?

For many major markets, the price shown at checkout includes applicable taxes or duties where supported. For international orders, customs rules may vary by country. The final checkout page will show the available shipping method and total cost before you pay.

If you are ordering for a business or need a tax invoice, please contact our support team for assistance.

Are your products 110V or 220V? What plug type is included?

Our products support both 110V and 220V. The correct voltage and plug type will be automatically matched based on your shipping country.

Do you offer a warranty?

We offer a 1-year warranty and a 30-day return policy.

Where do you ship from?

We ship from our warehouses in the US, UK, Germany, and China, depending on product availability and your delivery location.

How often should I replace the filters?

Filter life depends on the material being processed, smoke volume, daily usage time, and working environment. If you notice weaker suction, stronger odor, reduced filtration performance, or visible dust buildup, it may be time to replace one or more filters.
Typically, replacement intervals are as follows:
Pre-filter: Every 30-45 days
Medium filter: Every 5-6 months
Main filter: Every 6-8 months
FumeClear machines use separate filter layers, so in many cases you only need to replace the filter layer that is saturated instead of replacing the entire filter system.

How do I contact customer service?

You can email us directly at support@fumeclear.com

We're here to help and will get back to you as soon as possible!

What size fume extractor do I need for my laser machine? Is a more powerful unit always better?

Not necessarily. The right fume extractor depends on your machine size, usage frequency, and material type.

Choosing an oversized system may increase noise and cost unnecessarily. The ideal setup balances airflow, filtration efficiency, and application requirements.

Can I use a soldering fume extractor for laser engraving/cutting?

It is not recommended. Soldering fume extractors are typically designed for light-duty applications and may not provide sufficient airflow or filtration capacity for laser engraving.

Long-term use in laser applications may also lead to faster filter clogging and reduced machine lifespan.