FumeClear FC-2001X Laser Fume Extractor with H13 HEPA for Small Engraver, UV & DTF Printer

5.0 out of 5 starsThis fume extractor is meant for laser engravers, but for the time being, I'm using it for my soldering work. With that being said...Finally breathing easy while soldering-this thing works great!I've been soldering a lot more lately for hobby projects, and the fumes were starting to get to me-that sharp, headache-inducing smell was no joke. Decided to grab this fume extractor, and wow, what a difference!Pros:? Super strong suction right out of the box-pulls the smoke straight in before it even reaches my face.? Pretty quiet on the lower settings (doesn't drown out my music or podcasts), and even on high it's not annoyingly loud.? Easy to set up, just plug it in, position the hose/arm where you need it, and go. Filters seem high-quality and easy to swap when needed.? Compact enough for my small workbench but powerful enough for longer sessions. No more watery eyes or lingering stink in the room.? Feels like a legit health upgrade, worth every penny for peace of mind.If you're tired of breathing solder fumes or just want cleaner air in your workspace, this is a game-changer. Highly recommend, five stars all the way! ??

The media could not be loaded.

I'll start with the basics. This is a very small/compact fume extractor. The included filter appears to be pretty good quality/several layers and I can detect some carbon within the cartridge. I like that it comes with several extra 'pre-filters' to catch large particles and be replaced. The unit is fairly quiet compared to other extractors I use, but this comes at a price--the unit does not create very much airflow. Besides the lower-power motor, I think the airflow is further impeded by the design--the exhaust is on the bottom of unit and the airflow is pretty restricted. I've attached a short video attempting to show the extraction performance on my standard-format UV laser. (Part of the noise in the background is my industrial chiller running.) The unit barely creates enough air movement for this very light duty engraving.I think this unit would be suitable for small format laser engravers (like the xTool F1) doing light-duty engraving and perhaps other uses like resin printing as illustrated in the listing. I would not, however, recommend it for larger format lasers especially without an enclosure, nor would I recommend it for heavy-duty engraving/cutting. That said, I would certainly use it versus having no extraction. While cheaper than more industrial/larger extractors, I think the price is somewhat steep for what it is...

As someone with limited workshop space, its small footprint was a major point, but the real surprise was the powerful suction, it captures nearly all the smoke and leaving almost no odor in the room. Now, I can work for hours in a clear, comfortable environment. The multi-stage filtration system is well-designed, with five replaceable pre-filters that help extend the life of the main filter. Highly recommended for hobbyists and small studios!"

Had it two weeks already and can’t use it cos someone forgot to include the power unit. Well done so 0 points for logistics. Hope it lives up to its promise otherwise I’m sending it back.

SummaryI'm using this extractor with the Sculpfun iCube Ultra, and the combination works extremely well. Between the iCube's built?in filtration and the FC?2001X's suction, smoke is basically eliminated and only a small amount of fumes remain. It's a strong performer, but there are a few usability improvements that would make it even better for laser setups.PerformanceSuction is excellent. With a 3D?printed reducer to step the iCube's 80?mm exhaust down to the extractor's 60?mm inlet, I was able to get a tight hose seal and great airflow. During engraving, smoke is pulled immediately, and the room stays clear. For a compact laser like the iCube Ultra, this extractor is more than capable.Noise LevelOn high, it's about as loud as a vacuum definitely noticeable, but I'll take noise over poor draw any day. The three suction levels help a lot: low is quiet enough that it blends into an active room, and medium is a good balance for most jobs.Ease of UseOperation is simple with minimal controls: power, fan up, fan down. That's all you really need.However, because I have the unit mounted above eye level, the flat buttons are hard to locate by feel. Some raised markings or tactile indicators would make a big difference.Another feature that would improve the experience is an 'always?on' mode so it could be controlled by a remote switch or smart plug. For laser workflows, that would be extremely convenient.Pros- Strong suction, especially paired with the iCube Ultra- Clears smoke effectively with minimal lingering fumes- Simple, straightforward controls- Works well with custom adapters for different exhaust sizes- Multi?level fan control helps manage noiseCons- Loud on high (vacuum?level noise)- Buttons are flat and hard to locate when mounted high- No 'always?on' mode for remote or smart?switch control- Requires an adapter if your laser uses a larger exhaust portFinal VerdictA powerful, reliable fume extractor that pairs extremely well with compact lasers like the iCube Ultra. It does its job very well, and with a few small usability improvements, it would be close to perfect for workshop laser setups.

Veryyy amazing noise is not that bad but i am using it for my UV PRINTER and BYE BYE INK SMELL and it keeps the VOC and everything good and green, quality? AMAZINGGGGGGG AND SUCH A GOOD DEAL FOR MONEY

I use the FumeClear with my XTool M1, and I am thrilled. I do a lot of wood cutting and engraving. That generates some nasty odors, which this little unit absorbs perfectly! It was a very good purchase!

Where were you when I ordered my laser equipment??? This unit is so quiet, I have to make sure it's running. And can you get any SMALLER??? I am so glad we purchased this item. The filters are so easy to change as well. THANK YOU for this equipment!!

SummaryI'm using this extractor with the Sculpfun iCube Ultra, and the combination works extremely well. Between the iCube's built?in filtration and the FC?2001X's suction, smoke is basically eliminated and only a small amount of fumes remain. It's a strong performer, but there are a few usability improvements that would make it even better for laser setups.PerformanceSuction is excellent. With a 3D?printed reducer to step the iCube's 80?mm exhaust down to the extractor's 60?mm inlet, I was able to get a tight hose seal and great airflow. During engraving, smoke is pulled immediately, and the room stays clear. For a compact laser like the iCube Ultra, this extractor is more than capable.Noise LevelOn high, its about as loud as a vacuum definitely noticeable, but I'll take noise over poor draw any day. The three suction levels help a lot: low is quiet enough that it blends into an active room, and medium is a good balance for most jobs.Ease of UseOperation is simple with minimal controls: power, fan up, fan down. That's all you really need.However, because I have the unit mounted above eye level, the flat buttons are hard to locate by feel. Some raised markings or tactile indicators would make a big difference.Another feature that would improve the experience is an always?on mode so it could be controlled by a remote switch or smart plug. For laser workflows, that would be extremely convenient.Pros- Strong suction, especially paired with the iCube Ultra- Clears smoke effectively with minimal lingering fumes- Simple, straightforward controls- Works well with custom adapters for different exhaust sizes- Multi?level fan control helps manage noiseCons- Loud on high (vacuum?level noise)- Buttons are flat and hard to locate when mounted high- No always?on mode for remote or smart?switch control- Requires an adapter if your laser uses a larger exhaust portFinal VerdictA powerful, reliable fume extractor that pairs extremely well with compact lasers like the iCube Ultra. It does its job very well, and with a few small usability improvements, it would be close to perfect for workshop laser setups.

This fume extractor can be useful really only if you can attach the floppy hose to whatever you're trying to filter. It doesn't work great as an all-purpose fume extractor because the included hose is just a floppy tube.-I have a different fume extractor from this same company that comes with a bendable, positionable hose which makes it an all-purpose tool.-I'm not sure if this company sells an add-on positionable hose, but that would be a very worthwhile accessory.-Build quality is very good.-Comes with a bunch of extra filters which is nice.-The controls are intuitive although you do have to long-press to turn it on which is a major pet peeve.-The air exhausts out of the bottom which does mean more airflow restriction than if it went out the back or side.

The size of this machine is just right, making it a perfect match for my mini laser engraver!