FC-100A Fume Extractor Filter Sets

FC-100A Fume Extractor Filter Sets When the soldering smoke is drawn in.

• The 1st layer pre-filter filters out the large particles in the exhaust.
• The 2nd layer of the hepa filter immediately afterwards filters most of the dust below 0.3 microns.
• Finally, the fume residue is completely filtered by the 3rd layer of main carbon filters and is converted into fresh air discharge from the exhaust port, and the purification rate can reach 99.97%.

Pre-filters are designed to filter large airborne particles such as wood chips, iron filings, plastic debris, etc. Service life about 168-240 hours

Medium Hepa filters are used to filter tiny particles floating in the air, such as iron powder, wood dust, etc., to prevent inhalation into the lungs. Service life about 960 hours

The main carbon filter is used to purify invisible harmful gases and powder dust below 0.3 microns, and the activated carbon particles in the cartridge will firmly adsorb the harmful substances in the smoke. The purification effect is up to 99.97%, truly guarding your health. Service life about 1300 hours

Give you a truly healthy and pollution-free living environment.