✈ Free Shipping for US Orders and Ship from US
Subscribe to get 5% off for Your First Order, Code：FUMECLEAR
products details
specifications
reviews
faq
Boasting a triple-layer filtration system, it starts by sieving out coarse particulates on the initial layer, then nabs finer dust on the second, and culminates with the third layer purifying the air to perfection, ensuring a clean, contaminant-free airstream for a healthy workspace.
The built-in brushless motor is a real workhorse. Its design allows for seamless operation, churning out robust torque for top-notch performance. Minimizing friction-induced wear and tear compared to brushed variants, it sips energy sparingly and touts an extended service life, sparing you the headache of frequent upkeep and costly replacements down the line.
Equipped with a sophisticated anti-clogging mechanism, it stands as a stalwart shield against blockages. It wards off the accumulation of debris – be it sawdust, metal shavings, or other pesky particles – that could gum up internal passages. By keeping everything flowing freely, the equipment stays in peak operating condition, maximizing productivity around the clock.
This equipment hums along at a barely audible volume, making it a breeze to work alongside without the slightest distraction. Thanks to its cutting-edge engineering, noise output during operation is dialed down to a minimum, fitting snugly into any work setting, whether a bustling factory floor or a hushed office cubicle, and providing a tranquil work ambience.
Specifications
Model
FC-2002
Flow
153CFM
Air inlet interface
Φ75mm *1 flange
Noise
<55 dB
Filter Stages
1. Pre-filter
2. Medium HEPA filter
3. Main carbon filter
Dimensions(L*W*H)
11.22*11.22*17.73 inches
Weight
23.6 lbs
Power
160W
Certification
CE & FCC
It doesn't eliminate all the smell, but my garage is clear of smoke when I run this connected to my laser enclosure. Best of all fumes, smoke, soot aren't leaking into the house. My wife and family are very appreciative.After reading reviews on various similar units, I had limited hope that one of these type of units would help. However, I was very surprised how well it does. I don't have to wear a mask while my Longer Ray5 20W is running. Worth the investment.
Laser engraving with 40w laser. Have done multiple cuts with zero smoke. However, you will still have a little bit of smell. I have an ozone generator that I plan on running after I have vacated the room. This unit comes with a few prefilters which I imagine get clogged pretty quick. It looks like replacement filters are on back order so I'm hoping they are available when I need them.Great for the price considering anything that does better costs double.
Remote sometimes works, suction is the same with a half price machine, only filter bigger, and filter replacement is so expensive
I had this hooked up to my 10w enclosed laser engraver and it worked well removing the smoke and smell from my machine. Now I use this connected to my airbrush booth and it also works well for this!
I tested the first filter with a small welding job. It is not meant for it but it did work. This is much better suited to a 30w laser.
Frequently Asked Questions
Still have questions? Send us your questions by filling out the form below, we will be happy to assist you.
What types of machines can the FumeClear® FC-2002 be used with?
The FC-2002 fume extractor is designed for light-to-medium smoke applications, including laser engravers up to 20 W, soldering, resin 3D printing, and craft workshops.
It provides 153 CFM of focused suction power — ideal for light engraving on wood, leather, and coated plastics.
For heavy-smoke materials such as acrylic or MDF deep cutting, we recommend upgrading to FumeClear FC-350 or XL Series, which offer higher airflow and larger activated-carbon filters for dense odor removal.
Does FC-2002 work with laser engraving machines such as F1/S1/M1/D1 Pro?
Of course! The FC2002 fume extractor is very suitable for laser engravers with 10-20W laser power. Its 260m³/h air intake ensures complete absorption of the fumes generated during laser engraving.
What’s the difference between FumeClear® FC-2002 and FC-2002A?
Both models share the same 153 CFM suction power, triple-layer filtration system (pre-filter + HEPA + activated carbon), and durable metal housing.
The main difference is that the FC-2002A includes an external exhaust hose, allowing you to vent the filtered air outside — a feature often required by schools, labs, or public institutions to meet air-safety standards.
Visually, the FC-2002 comes in classic silver, while the FC-2002A features a black finish for easy model distinction.
💡 Tip: For private workshops or small studios, FC-2002 already delivers clean air through safe internal circulation. For regulated or enclosed environments, FC-2002A provides extra compliance and flexibility.
Where to buy the FC-2002 replacement filters？
You can order original FC-2002 filters directly from our official site here.
How often should I replace the filters?
We recommend replacing:
Pre-filter every 1-3 months
Middle HEPA filter every 3-6 months
Activated carbon filter every 6-8 months
The lifespan depends on usage intensity and material types.
What type of battery does the remote control use?
Our remote control unified use of CR2025 button cell, the remote control has been equipped with a, can be used directly.
Let's Hear What Our
Customers Say
SoundMan
I was not expecting this level of quality. This is actually well made and the electronic controls were a big plus. In fact, it seemed a bit over-designed. Overall, the suction is good for general laser engraving and cutting 3mm plywood, and the multiple filters held up well. It’s built like a tank and delivered on the listing promise. I should note, this would not be big enough for laser cutting 1/2” wood, but that is beyond the scope of this product anyways. The duct is sturdy and moves to where you need it and how thoughtful they were to include silicone intakes which help if this is for soldering as spatter will not stick to it and ruin the tube. Overall, this is a great value for the money. Very happy.
0
0
Jul 22, 2024
I wish the unit was easier to connect to my xtool D1 pro laser engraver, yet I was able to connect the hose from the enclosure to your hose using electrical tape to seal off the hoses. Works great and no smoke smell in my shop at all. Thanks
2
0
Jul 15, 2024
Bowie
My unit had come with a tube that was too large for the attachment site,.. Company responded quickly and sent another, which was unfortunately the same size larger tube. Company again responded quickly and sent one directly from Hong Kong,.. wait time was a bit longer but this time was the correct tube, they also sent me additional filter for the inconvenience,..
As for the unit itself,.. for my application works great!! no smells intruding into my living space,... NICE!!
It is a bit loud,. but no big deal to me. I use this for extracting fumes from 20 watt laser engraving machine.
THANK YOU Fumeclear!!!
0
0
Dec 24, 2023
Thanks for subscribing!
This email has been registered!
