FumeClear® FC-100A Lötrauch-Absauger mit Fernbedienung – Tisch-Rauchabsorber & HEPA-Filter

Great extraction for soldering work — I typically run it at around 80% and that’s plenty. Best results if you keep it within about 150mm of your work area.

I expected the noise at maximum to be more noticeable, but honestly it doesn’t bother me at all. The IR remote is good for my needs, though a proper wireless (RF) remote might have been even better since IR needs line of sight.

Well built unit overall — metal construction that should last a long time. I found the perfect spot for it under my desk (see pictures). When it’s not in use, I just move the hose to a vertical position out of the way.

I got this fume extractor to get rid of toxic smoke while soldering and it works great for that purpose.PROS-Excellent, solid build quality. The metal box with fan is very solidly built.-The hose works well to posiition it where you want. Due to the weight of the hose, there can be slight gravity drooping if you extend it out too far though. So I would not expect to use the full length of the hose.-Suction quality is excellent. It is able to capture all the smoke as long as the hose is within 2-4 inches of the solder.-The remote control works well and gives another options for control.-Controls are intuitive. I really only use the on/off function though.-Comes with a bunch of extra filters.-Sound level is not too loud. You don't need to use ear protection unless you are using it for prolonged periods.CONS-There is no integrated spot to store the remote which means the tiny remote can easily get lost. I recommend getting adhesive velcro tape so you can stick the remote onto the top of the metal fumer.

This thing is WAY higher quality than I was expecting.

This fume extractor is one of those tools you do not realize you need until you start using it regularly. It makes a noticeable difference almost immediately, especially if you are working with a laser, soldering, or anything that produces smoke or fumes.The suction is strong for a unit this size. It pulls in smoke effectively and keeps it from lingering in the air, which makes the workspace much more comfortable. With airflow around this range, it is well suited for small to mid-sized setups rather than large industrial use.The filtration system is also a standout. The multi-stage setup with HEPA and carbon filters does a good job removing both particles and odors, which is key for indoor use. It is designed to capture up to 99.97 percent of fine particles, and in practice it does a solid job keeping the air clean.I also appreciate the usability. The remote and digital display make it easy to adjust settings without interrupting your workflow. It feels thoughtfully designed for real use rather than just a basic fan with a filter.A couple of things to keep in mind. It is not silent, so you will hear it running, though it is reasonable for the level of suction. And like any extractor, you will need to replace filters over time, which adds to the long term cost.Overall, this is a high quality, practical piece of equipment that does exactly what it is supposed to do. If you are working with fumes regularly, it is a worthwhile investment for both comfort and safety.

I was nervous to get this because of the price but it was worth every dollar. I am a licensed nail tech and do nails from home so i really needed a way to make sure the whole building didnt smell like monomer. And this absolutely did the job beautifully. I did pair it with an air purifier but would buy this again without hesitation

This extractor is nice and quiet on low settings for soldering but powerful enough to pull the large amounts of smoke generated by a diode laser on wood. The remote option is nice. The only thing it's missing is a Y piece to hit multiple locations.

This 100W extractor pulls smoke and odors away from my laser engraver with impressive power. It's also fairly quiet for its suction power. The 3 stage filtration system effectively captures particles, making the air in my workshop much cleaner. I like the remote control panel for easy speed adjustments while I work. The unit is compact enough for a desktop but sturdy enough for heavy soldering tasks. At 319 bucks, the performance justifies the cost for personal safety. The digital display provides clear feedback on the current settings and status. This extractor efficiently removes harmful fumes and keeps my workspace breathable during long projects.

Excellent quality fume extractor! I recently purchase a laser engraver, and about smokes us all out of the shop trying to make a cutting board. This works great to get the smoke and fumes out and allows us to all keep working while the laser is going. The noise isnt too bad, and we're all still able to function and work with it on. It works really well for our small laser!

I ordered this to use for desktop soldering. My previous employer had a much more expensive version of this product and I'll use that as a reference: the power is on par with the more expensive unit, the noise level is higher, it is smaller and more portable, the flexible pipe is more rigid and easier for fine adjustment, the fume extractor attachment seems to be high temperature silicone which is more flexible and less likely to burn.Considering this unit costs around 4 times less, I think it deserves 5 stars even though it is louder.

Let's see, the size and power are about 'medium' for the extractors I have tried. It's large enough to actually create some airflow without being problematic to find space for. The quality of the build seems quite good. The unit comes with a 'substantial' carbon filter cartridge and lots of spare 'pre-filters.' The noise level (on high) is 'loud' but that comes with the territory if you want real extraction. From there, you can dial back speed for lighter duty work which is nice. I rate the size/power near perfect for the type of stuff I do with my enclosed UV laser. I have a small one that's not really powerful enough and a larger one that's obnoxiously loud. Note that I don't do really heavy duty cutting/engraving. If I had a fiber laser and was deep engraving/cutting, I would still probably look for something with more power...The remote is quite handy when you need to tuck the unit where you can't reach it easily...The one thing I really don't care for with this unit (and others) is the segmented plastic hose they come with. They're kind of difficult to snake around where you want and I believe restrict the airflow. My next upgrade will be a different hose.I think the value is pretty good. Similar units specifically for lasers can easily cost twice as much.