
Made for Your 10W–20W Laser Engraver
Designed for popular 10W–20W diode laser engravers, the FumeClear FC-2002 delivers powerful fume extraction for everyday engraving and light cutting projects.
Whether you're using an xTool M2, xTool D1 Pro 20W, AtomStack A20 Pro, LONGER RAY5 20W, SCULPFUN S30 Pro Max 20W, or a Creality Falcon 20W laser engraver, the FC-2002 provides an effective fume filtration solution for your laser workspace.
Don't Let Laser Smoke Take Over Your Workspace.
Laser engraving and cutting produce smoke, fine particles, and unpleasant odors that can spread throughout your workspace.
Simply blowing smoke away isn't enough. The FC-2002 captures fumes at the source and filters airborne particles and odors, helping keep your workspace cleaner.

3-Stage Filtration for Smoke and Odor Control
A 3-stage filtration system captures airborne particles and helps reduce unwanted odors.
Pre-Filter: Captures larger dust and debris.
H13 HEPA Filter: Captures 99.97% of particles down to 0.3 microns.
Coconut Shell Activated Carbon: Adsorbs odors and certain gaseous pollutants.

Strong Airflow. Efficient Fume Capture.
With airflow up to 153 CFM (260 m³/h), the FC-2002 provides the suction capacity needed for effective fume collection in small-scale laser applications.
Its powerful airflow helps draw smoke through the extraction hose and into the filtration system, keeping fume collection close to the source.
Ready for Your Everyday Creative Projects

Compact Design. Flexible Placement.
Make better use of your workshop space with the FC-2002's compact form factor.
- Space-Saving Footprint: Fits conveniently into small workshop layouts.
- Flexible Extraction Hose: Allows convenient positioning around your laser setup.
- Remote Control: Adjust operation without repeatedly approaching the unit.
- Easy Integration: Designed to work alongside compatible laser enclosures and fume collection setups.
Dimensions: 11.22 × 11.22 × 17.73 inches.

Easy Maintenance. Ready for More Projects.
Keep your filtration system in good working condition with convenient filter replacement and maintenance.
- Replaceable Pre-Filters: Keep spare pre-filter cotton pads on hand for routine replacement.
- Independent Filter Replacement: Replace the corresponding filter when maintenance is needed.
- Filter Blockage Monitoring: Built-in monitoring helps alert you when airflow restriction requires attention.
- Replacement Filters Available: Easily replenish your filtration supplies when needed.
Filter life varies depending on operating hours, processed materials, and smoke concentration.

Make Every Engraving Session Cleaner.
Upgrade your laser engraving workspace with FC-2002 laser fume extractor.
FAQ
What types of laser engraving materials can it be used with?
What types of laser engraving materials can it be used with?
It can be used for suitable materials such as wood, paper, and certain other engraving materials. Always check material safety before laser processing. Never use it with PVC, vinyl, or other materials that may release hazardous gases.
Does the FC-100A require an outdoor exhaust duct?
Does the FC-100A require an outdoor exhaust duct?
No. The FC-100A uses a recirculating filtration system, so no outdoor exhaust duct is required for normal operation. However, proper room ventilation is still recommended. If you specifically need an external exhaust solution, consider the FumeClear FC-2002A.
How do I connect the FC-100A to my laser engraver?
How do I connect the FC-100A to my laser engraver?
The FC-100A comes with a 1.2m flexible segmented hose. Secure the hose intake near your laser engraver's exhaust outlet to capture smoke and particles at the source. Its 360° adjustable positioning makes setup easy.
Can the FC-100A handle high-power laser cutting machines?
Can the FC-100A handle high-power laser cutting machines?
The FC-100A is intended for small desktop laser engraving applications. For higher-power lasers or heavier smoke loads, consider a more powerful model.
How often should I replace the filters?
How often should I replace the filters?
Filter replacement intervals depend on usage frequency and emission levels. We recommend replacing the pre-filter every 1–3 months and the main filter every 6–8 months. If you use the extractor frequently or process larger amounts of smoke, more frequent filter replacement may be necessary.


