An air purifier is only one part of a good 3D printing air management strategy. Here are several additional practices worth following:
1. Choose Filaments Carefully
Understand the properties of each material before printing. When possible, choose lower-emission alternatives that meet your project's requirements.
2. Keep the Printer Enclosed
Use the printer's enclosure as intended to help contain emissions and prevent them from spreading directly into the room.
3. Use Source-Level Extraction
Position the extraction inlet or connect a suitable duct to capture contaminated air close to the printer enclosure. Avoid relying solely on a purifier placed far away in the room.
4. Maintain Adequate Ventilation
Use appropriate room ventilation, and consider outdoor exhaust for materials that require more careful emission management.
5. Replace Filters Regularly
Dust accumulation and activated carbon saturation can reduce filtration performance. Inspect the filters and replace them according to usage conditions and manufacturer recommendations.
6. Allow Proper Clearance Before Opening the Enclosure
After printing, allow the filtration and ventilation system to operate as appropriate before opening the printer, particularly after printing materials with stronger odors.